DWX-50 Milling Specifications

Cuttable material   Zirconia (pre-sintered), Wax, PMMA, Composite Resin
 Loadable workpiece  shape   Disc(with levels)  External diameter (level section):  98 mm to 100 mm
External diameter (body section):  95 mm
Height (level section): 10 mm
Height (body section): 12 to 26 mm
Disc(without levels)  External diameter: 98 to 100 mm
Height: 10 to 14 mm, 16 to 20 mm
Block  Width x Depth: 38 mm x 76 mm
Height: 16 mm or 22 mm
 Operating speed   X and Y axes: 6 to 3600 mm/minZ axis: 6 to 1800 mm/min.
 Spindle Motor  Brushless DC motor, maximum 100W
 Spindle speed  6,000 to 30,000 rpm
 Rotary axis travel angle  A:± 360o, B:± 20o
 Number of tools  housed  5
 Attachable  tool
 Shank diameter: 4 mm, Length: 40 to 55 mm
 Compatible  compressed  air  0.02 to 0.2 MPa
 Vacuum requirements  8 kPa Static Pressure or more
 Interface  USB (compliant with Universal Serial Bus Specification Revision 1.1)
  Power requirements  Voltage and frequency: AC100 to 120 V/220 to 240 V ±10%,50/60 Hz  (overvoltage category II, IEC 60664-1)
Required power capacity: 2.8 A (100 to 120 V)/1.2 A(220 to 240 V)
 Power consumption  Approx. 275W
 Operating noise  During operation: 70 dB (A) or less (when not cutting)
 During standby: 45 dB (A) or less
 External dimensions  Width x Depth x Height:  656 x 656 x 557 mm
 Weight  50 Kg
 Installation Environment  Operating environment: Temperature of 5 to 40o C, 35 to 80% relative humidity (no condensation) Ambient pollution degree: 2 (as specified by IEC 60664-1)

System Requirements

 Computer  Model preinstalled with the 32-or 64 bit edition of Windows 8,7, Vista, XP, or upgraded computer originally preinstalled with Widnows XP or later
 USB cable  Use the included USB cable