| Cuttable material | Zirconia (pre-sintered), Wax, PMMA, Composite Resin | |
| Loadablework – piece shape | Block: Width x Depth: 76×38, Height: 16 to 22 mmPin type: Width x Depth x Height: Maximum 85 x 40 x 22 mm | |
| Operative System | XYZ axis: 0.24 to 70.8 in./min. (6 to 1800 mm/min.) | |
| Spindle motor | Brushless DC motor | |
| Spindle speed | 6,000 to 30,000 rpm | |
| Rotary axis travel angle | A: ±360° | |
| Number of tools housed | 2 | |
| Attachable | Shank diameter: 4 mm, Length: 40 to 55 mm | |
| Compatible compressed air | 0.02 to 0.2 MPa | |
| Interface | USB (compliant with Universal Serial Bus Specification Revision 1.1) | |
| Control command set | RML-1, NC code | |
| Power requirements | Voltage and frequency:AC100 to 120 V/220 to 240 V ±10 %, 50/60 Hz(overvoltage category II, IEC 60664-1) Required power capacity:2.0 A (100 to 120 V)/1.0 A (220 to 240 V) | |
| Power consumption | Approx. 70 W | |
| Operating noise During operation: | 70 dB (A) or less (when not cutting) | |
| During standby: | 40 dB (A) or less | |
| External dimensionsWidth x Depth x Height: | 13.4×14.4×16.0 in. (340×365×405 mm) | |
| Weight | 48.5 lbs (22 kg) | |
| Installation Environment | Indoor Use, altitude: up to 2000 mTemperature: 41 to 104 °F (5 to 40 °C)Relative humidity: 35 to 80 % (no condensation)Ambient pollution degree: 2 (as specified by IEC 60664-1)Short-Term Temporary Overvoltage: 1440 VLong-Term Temporary Overvoltage: 490 V | |
| Included items | Power cord, USB cable, Manual, Software Package CD-ROM, Detection pin,Automatic correction jig, Clamp for block workpiece, Hexagonal screwdriver,spanner, Tool holder, Tool positioner, Dust collection hose, Regulator, etc. | |
| System Requirements for USB Connection | ||
| Computer | Model preinstalled with the 32- or 64-bit edition of Windows XP, Vista, 7, 8 or upgradedcomputer originally preinstalled with Windows XP or later | |
| USB Cable | Use the included USB cable. | |
| ZAT-4D 4 Position ATC | ||
| Number of tools housed | 4 | |
| Attachable tool | Shank diameter: ∅ 4mm, Length:40 to 55mm | |
| Loadable workpiece shape | PIN type (small) | |
| Loadable workpiece size | Width x Depth x Height: Maximum 22 x 50 x 22 mm | |
| Included items | ATC magazine(For 4 pieces), Automatic correction jig (For 4 pieces), Adapter, Hexagonal wrench, Tool holder (3), Mounting screw L Detection pin（2）, Mounting screw S（6）, Screw (For spare 2) | |
| ZV-4D Multi-Pin Clamp | ||
| Loadable workpiece shape | PIN type (small) | |
| Loadable workpiece number | Maximum 4 | |
| Loadable workpiece size | Loading 4 piece workpieces: Width x Depth x Height: Maximum 14.5 x 21x 20 mm Loading 3 piece workpieces: Width x Depth x Height: Maximum 20 x 21x 20 mm | |
| Included items | Multi-pin clamp, Mounting screw L (6) | |
| ZDB-100D/50D/30D Milling Bur | ||
| ZDB-100D | R1.0mm Milling Bur for composite resin | |
| ZDB-50D | R0.5mm Milling Bur for composite resin | |
| ZDB-30D | R0.3mm Milling Bur for composite resin | |